Cleaning the Workshop - Page 36
I got caught up in all the sanding bits and pieces.
| This box has all sorts of pen mandrils and the inserts for holding them in both Morse 1 and 2 tapers along with different bushings and the like. For now I brush off the box and back it goes. |
|
| I took a tool box ages ago and inset a cut down cd holder with empty cd boxes as dividers. It is used to hold quarter cut sheets of sandpaper. With the appropriate grit written on the end of the cd holder, it is easy to grab the correct sheet. Once again I brush off the box and back it goes. |
|
| This box, on the other hand, has a bunch of interesting stuff that should be sorted. The sand paper sheets can go in the cd paper box. Assorted disks can go in appropriate places. |
|
| Here is a 2" sanding disk holder I made some time ago. Works great although I prefer the 3" most of the time. |
|
| Roll loc holders tend to be somewhat brittle. These two have been cracked somewhere along the way but they are still useful. |
|
| Notice how this one still holds the sanding pad very well. |
|
Leave comments if you like at Round Opinions.
© 2015 copyright Darrell Feltmate, Around the Woods