Around the Woods

Cleaning the Workshop - Page 28

Tools are dust makers and dust collectors.

The material that was moved to the center of the room now has to be moved to the cleaned side, keeping in mind that a path has to be left and that some things will need to be moved again and others will put in their new homes. a path has to be left a
A space was carefully measured to hold the table and the shelves are filling.    carefully measured to hold the table
Carving materials are finding a home beneath the table and jigs for the table saw are now on top.  Carving materials are finding a home
The belt/disk sander will need to be cleaned before moving.  The belt/disk sander will need to be cleaned before moving
Remove tables and supports and clear the dust.  Remove tables and supports and clear the dust.
Lift up the sanding patten, remove the sanding belt, and again brush away any dust that can be reached before blowing the rest away. brush away any dust that can be reached

Leave comments if you like at Round Opinions.


Wood Turning Home What's New Wood Turning Contents wood turning tipswood turning techniqueswood turning projects: beginnerwood turning projects: intermediatewood turning projects: advancedwork in progresswood turning tools to makewood turning accessories to makewood turning gallerywood turning lathe maintenancelinksWood Turning Course 1919other interesting things Wood Turning Discussion ,   Our Privacy Policy

 

© 2015 copyright Darrell Feltmate, Around the Woods

"doing you a good turn today"