Making the Quick Oland Tool
Wood turning tools: making a quick Oland tool for face plate work. (2)
| Then I wrap the handle. The drill vise is not tight, it merely keeps the handle from rolling along the bench top. A couple of scrap boards clamped in place would be fine. |
|
|
| The handle is taped off at the end and the tool is done. |
|
| Just fasten the tip in place with the set screws and sharpen on the grinder. |
|
| The tip is ground to 45° on the coarse wheel |
|
| and rounded and sharpened on the fine wheel. It is now ready to be used. |
|
If this has been helpful to you please let me know.
© 2015 copyright Darrell Feltmate, Around the Woods